|
The
large, clear display shows EMF AND Ambient
Temperature simultaneously to provide the
user with a direct correlation between EMF and
Temperature change in the surrounding
area. This is the only meter
that can do this!
We have personally tested this meter and it is a fantastic new tool. This Instrument was designed by Pro-measure for Paranormal enthusiasts. The Mel Meter Model 8704 was specifically designed for Paranormal Investigators. Many important features have been incorporated into this durable, precision hand held instrument. • ELF Range down to 30Hz ! • Glow in the dark buttons! • Custom Dual Display Correlates EMF & Temperature Cold Spots Simultaneously! • EMF "Burst" Mode Feature for Tracking Dynamic EMF movement • Measurement Ranges: 20, 200, 2000 uTesla 200, 2000, 20,000 mGauss • Super Bright Custom "Nightview" Display with On/Off Button • Fast Response Thermocouple Temperature Sensor • Record Feature Captures Min & Max Values • Tripod mountable Measures EMF & Temperature "Cold Spots" Simultaneously That's right...the Mel Meter is the only Instrument that can do this. If you're a Sci Fi Ghost Hunter fan, you'll notice that during their Investigations, they will often encounter an EMF change which is usually followed by a significant Temperature drop. Now, imagine being able to validate both changes simultaneously, and be able to track the source in real time with one hand in total darkness! No more fumbling for a flashlight to see the display in the dark. Custom "Night View" Display The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" Ambient Temperature on the same screen. Both measurements can be read from 10' to 15' away. The display can be turned On or OFF manually for display viewing in dark areas, and it is also bright enough so that it can be used in total darkness to navigate stairwells, corridors and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light. EMF "Burst Mode" This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. I like to use the "Record" function in this mode because it can capture the Min & Max measured values. So, if you have a EMF meter with a standard LCD display, get ready for a big change! Mel-Cal The Mel Meter is the only Intelligent EMF / Temperature device that uses a proprietary "Smart Calibration" function that allows the user to Calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of Spec. All you need to do is contact us and give us your serial number ID. We will provide you with a special code sequence to get your unit working in "Like New" condition again...it's that simple! |
|
All about DGHS
|